(2011.02.01記す)

BluetoothのMini-Keyboardをイオシスで購入。(サイズはiPodと同じ)
さて、これが使えるか。。。
購入したのは、これ。
MINI KEYBOARD
としか裏面に書いてない。
説明書はどこにいったかなー。
ああ、どうやらミニサイズのCDがあったようだ。これにPDFファイルで説明書があるようで、
私のマニュアルページに載ってた。
とにもかくにもペアリングを実験
1)デバイス(iPodのこと)でbluetoothをon.
2)bluetooth mini keyboardの電源をon.
3)bluetooth mini keyboardのペアリングボタンを押す。
 青LEDが点滅する。
4)android端末で、bluetooth機器を検索。
5)android端末でパスキーを入力、エンターボタンを押して、okボタンを押す。
6)mini bluetooth keyboardで、上記5)と同じパスキーを押し、エンターボタンを押す。
情報源はこちら。
http://seijinhyakuman.sblo.jp/article/41677448.html
See also,
http://www.teksoftco.com/forum/viewtopic.php?f=30&t=2603


ペアリングボタンはどこにある?
あった。上部右、ランプ二つの右にある細長い黒いのがペアリングボタンだ。

  


マニュアルに書いてあったこと:
メーカー名はいっさい書いてない。
書いてなかったが、BluToothでペアリングしようと、調べると、
このように出た。
Broadcom Bluetooth Wireless Keyboard
Broadcomがメーカー名か。
いや違った。//ja.broadcom.com/ はBlutoothチップのハードウェア・メーカーのようだ。
Mini Bluetooth Keyboard
User Manual
Version 1.0.111

Features
Bluetooth Version: Bluetooth V2.0
49 keys mini keyboard
Built in rechargeable Li-ion battery, Micro USB port charging
Color LED for working status indication
Built in intelligent power manage software for power conservation
Working range: 10m
Charging time: 3-4 hours

使う前に、バッテリーをリチャージしておく。
Hardware Installation
1. Switch the keyboard ON, by ON/OFF button:
   The BLUE led will light up for 2 seconds.
2. Press the pair/connect button :
   The BLUE led will flash.
3. Now the Mini Bluetooth keyboard is in pairing mode and
   waiting for connection with your device.

Notice:
1. When low power, the blue LED will light up for 1 second and be
   blinking intermittently.
2. When charging, the Red LED will light up, and be off when full
   charging.

Pairing:
1. Make sure your Bluetooth Mini keyboard is in the pairing mode.
2. Open the Bluetooth on your devices, and click "Add new"
3. Select the Bluetooth Mini Keyboard, and tap "Next"
4. When prompt for passkey, leave the passcode field blank and tap "Next"
   (if this fails, enter 0000 as a passcode and press Next)
5. At this step select the "Input device" service and tap "Finish".
6. Go to the Software settings Panel, and tap "Connect".



Here are some solutions for the error messages that might appear while using:
 a) "The software is not responding. You need to reinstall this software."
   This error is caused by a problem with the communication between the
   software components.
   You need to check if your Windows Mobile Device is compatible with the
   software, and try to reinstall the software.
 b) "Bluetooth is turned off. To use the software, please enable your Bluetooth
   module!" Make sure you are using the software on a smart phone with
   Windows Mobile (5.0 or 6.0) and the Microsoft Bluetooth Stack.
   Then enable Bluetooth before using the Software.
 c) "No active Input Device found. You need to pair a device, using the
   Bluetooth control panel."
   Make sure your Mini Bluetooth keyboard is correctly paired to your smart phone.
   If this error appears while your keyboard is paired, redo the pairing.



Settings panel
  To open the settings panel, go to Start->Settings->System TAB, and
  tap the icon named "Bluetooth Input Driver"


Macの場合:

iPad and iPhone 4.0 OSの場合:
1. Enter "Setting"---"General", turn on the bluetooth:
2. After turning on the bluetooth, it will search bluetooth devices automatically:
3. After finding "Bluetooth mini Keyboard", press the device, it will start
   connecting, and there will be a password displayed:
4. Press the password in your Bluetooth mini Keyboard, and "Enter", it will
   connect with your iPad/iPhone, now you can use your Bluetooth mini Keyboard
   to input words for your iPad/iPhone:


Keyboard Matrix List
Remark:
1. Press Fn+Enter will lock the Red symbols function.
   For example, press W will funcion as Arrow Up, O for +.  Repress Fn+Enter to unlock.
2. For Blue symbols, press Shift key together. For example, Shift+1 to be !, Shift+/ to be ?.
3. Multimedia function keys are just for iPad and PC.
4. Above guidelines are based on standard key matrix, certain mobile's matrix might be different.



「設定」→「言語とキーボード」→「BlueKeyboardJPの設定」→「Bluetooth設定」で、
Rii miniの電源を入れてBluetoothアイコンのキーを押して上から3番目のLEDが点滅したら、
「デバイスのスキャン」→「Macro Keyboard、PINの入力」を求められるので適当な数字の組み合わせを入力後、
Rii miniの数字キーでPINを入力して最後にEnterキーを押せば「ペア設定、非接続」となり、ペアリングが完了。
非接続とあるが、これを接続状態にするには、Bluetooth設定を抜けて、「使用するキーボード」→「Macro Keyboard」の
右隣の◎をタッチして緑になったら選択完了、
キー配列も同様にUS(QWERTY)を選択して戻って、BlueKeyboardJPにチェックを入れる。
最後に適当な文字入力画面(検索など)で入力エリアを長押しして、「入力方法」→「BlueKeyboardJP」を選択することで、
はじめて接続状態になり、画面上部左側の通知エリアにBlueKeyboardJPのアイコンが出てくる。

英語キーボードではあるけれど、ローマ字かな入力で変換する分には普通にスペースで変換、
さらにスペースで次の候補、カーソルキーで変換範囲伸縮、Enterで変換確定、Escで
戻るに相当といった具合。
Shift+スペースで英字入力モードとのトグル切り替えが出来る。
残念ながらタッチパッド部分は使えない。
触ると何やら文字が入力されるので反応はしている模様。