| CPU | Marvell 6281 800MHz |
| DRAM | 256MB DDRII RAM |
| Flash Memory | 16MB |
| HDD |
1 x 3.5" SATA I/II
|
| LAN Port | 1 x Gigabit RJ-45 Ethernet port |
| LED Indicators | USB, Status, HDD ,eSATA, LAN ,Power |
| USB | 3 x USB 2.0 port (front: 1; back: 2) Support USB printer, pen drive, USB hub, and USB UPS etc. |
| Buttons | System: Power button, One touch copy button, Reset button |
| Alarm Buzzer | System warning |
| Form Factor | Portable |
| Dimensions | 165.5 (H) x 60 (W) x 218.4 (D) mm 6.52 (H) x 2.36 (W) x 8.60(D) inch |
| Weight | Net weight: 0.79 kg/1.74 lb Gross weight: 1.7 kg/ 3.75 lb |
| Temperature | 0~40°C 32~104°F |
| Humidity | 0~95% R.H. |
| Power | External Power Adapter, 36W, 100-240V |
| Secure Design | K-lock security slot for theft prevention |
| Fan | 1 x quiet cooling fan (5cm, 12V DC) |
 |
|
HD-HGLAN PowerPC(HG)
http://buffalo.nas-central.org/wiki/Category:HG
| HD-HGLAN PowerPC (HG) | |
| CPU | 266Mhz Freescale MPC8241 with MPC603e Motorola PowerPC core. |
| RAM | 128MB ELPIDA DS2516APTA-75 SDRAM |
| Flash ROM | 4MB ST M29W320DT HG001 |
| USB | 2 type A(rear - /dev/usb/lp0, front - /dev/usb/lp1) - NEC D720101GJ |
| NIC | 10/100/1000Mb Realtek RTL8110S-32 PCI ethernet controller |
| IDE Controller | Silc0680acl144 OR IT8211 PCI IDE disk controller |
| Stock Firmware | 1.x |
| More Information | Information/HGOverview |
LS-GL(Ver1とVer2)とKurobox-PROの違い
http://buffalo.nas-central.org/wiki/LinkstationProLiveDifferencesLS-GL(Ver2)とKurobox-PROの違いは、
- Different daughterboard: There are good chances that the kurobox pro daughterboard works on the LS Pro v2 / LS Live v2
- No 256 MB NAND flash in LS: This of course is an advantage of the kurobox pro as it allows to store the Linux OS completely in flash.
LS-GL ARM9(LSPRO)
http://buffalo.nas-central.org/wiki/Category:LSProこれは玄箱Pro(Kurobox-Pro)にそっくり。でもBuffao製。
むこうではProとは呼ばず、Liveと呼ぶらしい。
（注意）：２機種あるので、その差に注意。裏面を見ないと違いがわからない。
Version-1とVersion-2の違い：
この２つはハードウェアが違う。うちにあるのは、どっち？
調べてみました。よかった自宅にあるのは、右の(Ver.2)のほうでした。
左がVer.1 右がVer.2。
| LS-GL ARM9 (LSPRO) | |
| CPU | MARVELL 88F5182 Media Vault Processor
System on Chip(SOC) |
| RAM | 128MB total: Two (2) NANYA NT5TU32M16AG or Elpida EDE5116AF DDR2 SDRAM |
| Flash ROM | Flash: SST 256K CMOS Multi-Purpose |
| Other | Two (2) 43DR39K Latch???
NEC 500T 0536KX00??????? |
| NIC | MARVELL 88E1111 Gigabit Ethernet Transceiver ("Alaska" series). |
| USB | 2 - USB 2.0 Max: 480 Mbps (HS Mode), Max: 12 Mbps (FS Mode) |
| SATA Controller | Marvell Serial ATA Adapter - Internal drive is formatted as XFS file system |
| Drive Capacity | 1TB, 750GB, 500GB, 400GB, 300GB, 250GB or 160GB |
| Hardware Overview | Information/LSPROOverview |
Kurobox-Pro
http://buffalo.nas-central.org/wiki/Category:KuroboxProこれはLS-GLにそっくり。でも玄人指向製。
Hardware Specifications
| Kurobox PRO | |
| Case | 60(W) x 163.6(H) x 215.5(D) mm |
| CPU Type | Marvell 88F5182 (400MHz) |
| CPU Speed | 400MHZ |
| RAM | 128MB (DDR2-SDRAM) |
| Hard Drive | Not included |
| IDE Host Controller | Sata - Marvell |
| Ethernet Controller | 1000BASE-T/100BASE-TX/10BASE-T (RJ-45)x1 (AUTO-MDIX) |
| USB Ports | USB2.0 (Type A) x2 + SATA + PCIExpressx1 |
| Interface | PCI-Express X1 x1, SATA x1, Through Hall (Pin Header) (UART x1, GPIO x2), I2C x1) |
| Flash ROM | 256KB (NOR : SST 39VF020), 256MB (NAND : SST NAND02GW3B2CN6) |
| Internal Bay | 3.5” SATA-HDD Bay x1 Internal Cooling FAN |
| Power supply | Input: AC110V or AC220V (Internal) Output: Max.25W (5V 1.5A, 12V 1.5A) |
KUROBOX(Kuro+KuroHG) 家にあるのはKuroboxHGおよびKuroboxPro
http://buffalo.nas-central.org/wiki/Category:KuroboxFrom NAS-Central Buffalo - The Linkstation Wiki
Kuro Box
The Kuro Box is the name for a series of
PowerPC and ARM processor based
computers intended for use as a
network-attached storage device.
The original Kuro Box was made from spare hardware components the manufacturer had from the Linkstation.
Recent versions of the Kuro Box use later Linkstation hardware or hardware very similar to the one of the Linkstation.
All Kuro Box versions are provided without a Hard Drive.
The case has the same physical dimensions and shape as the LinkStation, but it is black in color and has the
Kanji
symbols for Kuro Box (玄箱) in silver lettering on the side panel.
It has an internal Parallel ATA
or SATA interface for a user supplied hard drive (as the device does not come with one).
The product was designed to accept a Linux distribution, several have been ported to it by various user groups in both the USA/Europe and Japan.
It is sold by Buffalo Technology/Melco
Kurobox Specifications
| Kurobox 家にある |
Kurobox HG 家にある |
Kurobox HG WR | Kurobox PRO 家にある |
|
| Case | 7.0” x 2.4” x 7.4” | 7.0” x 2.4” x 7.4” | 7.0” x 2.4” x 7.4” | 60x163.3x215.5mm |
| CPU Type | MPC 8241 (MPC8241LZQ200D) | MPC 8241 (MPC8241LZQ266D) | MPC 8241 (MPC8241LZQ266D) | Marvell 88F5182 (ARM9Core/400MHz) |
| CPU Speed | 200 MHz | 266 MHz | 266 MHz | 400MHZ |
| RAM | 64 MB (K4S561632D-TC75) | 128 MB (MT 48LC16M16A2-75) | 128 MB (MT 48LC16M16A2-75) | 128 MB |
| Hard Drive | Not included | Not included | Not included | Not included |
| IDE Host Controller | Sil 0680A | Sil 0680A | Sil 0680A | Sata - Marvell |
| Ethernet Controller | 10/100 (ADMtek AN983B) | 10/100/1000 (Realtek RTL8110S-32) | 10/100/1000 (Realtek RTL8110S-32) | 1000BASE-T, 100BASE-TX, 10BASE-T (RJ-45)x1 (AUTO-MDIX) |
| USB Ports | 1 x 2.0 Type A (Rear) | 2 x 2.0 Type A (1 Front & 1 Rear) | 2 x 2.0 Type A (1 Front & 1 Rear) | USB2.0 (Type A) x 2, PCI-Express X1 x1, SATA x1, Through Hall (Pin Header) (UART x1, GPIO x2), I2C x1) |
| USB Host Controller | NEC μPD720101GJ-UEN | NEC μPD720101GJ-UEN | NEC μPD720101GJ-UEN | ?? |
| Flash ROM | 4 MB (Fujitsu 29PL32TM-90PFTN) | 4 MB (Fujitsu 29PL32TM-90PFTN) | 4 MB (Fujitsu 29PL32TM-90PFTN) | 256KB (NOR), 256MB (NAND) |
| Microcontroller | Atmel AVR (AT90S2313-4SC) | Atmel AVR (AT90S2313-4SC) | Atmel AVR (AT90S2313-4SC) | ? |
| Power supply | Internal 110V | Internal 110V | External 110V-240V switching | Input: AC110V (Internal) Output: Max.25W (5V 1.5A, 12V 1.5A) |
LS-VL
http://buffalo.nas-central.org/wiki/Category:LS-VL
| LinkStation ProLS-VL | ||
| Machine | Feroceon-KW (Kirkwood) | |
| Board | MVLSV-BA | |
| CPU | 88FR131 (88F6282) 1.6GHz Clock Speed | |
| RAM | 256MB = 2 x 128MB (Hynix H5TQ1G83TFR) | |
| Flash ROM | ||
| Other | ||
| NIC | 1000/100/10Mbps | |
| USB | 1 x USB 2.0 HiSpeed | |
| internal HDD | WD20EARS-00MVWB0 | |
| IDE/SATA Controller | ||
| Drive Capacity | 1TB, 2TB | |
| Fan | ||
| initial Networkname |
| SOFTWARE | |
| Toolchains | |
|---|---|
| Opened Firmwares |
|
| Development Tools | |
| GPL Kernel | http://opensource.buffalo.jp/ls-x-140.html |
| Prebuild packages |
|
| HARDWARE | |
| Board |